Digital LED Thermostat Temperature Relay Control Module 12V (XH-W1209)

How to Use:

• Connect the power supply and the load, then you can supply to the controller.
• It displays the measured temperature, press SET key, the display temperature flashing, press”+” “-” to set the desired temperature. After finished, press SET to confirm and back.
• Now the controller automatically performs the relay by setting off.
• This temperature controller output is 10A relay, meeting various high-power loads, please make sure the wires are connected correctly.

Indicator, LED State Instruction:

• Indicator: OFF indicates the relay is switched off; ALWAYS indicates the relay is closed.
• LED: shows LL means the sensor opens; shows HH means it’s out of range, the thermostat will be forced to close the relay, the display — as high temperature protection.

Specifications:

• Temperature Range: -50~110°C
• Resolution: 0.1°C(-9.9~99.9°C), 1°C(Other Ranges)
• Accuracy: 0.1°C
• Refresh Rate: 0.5s
• High Temperature Protection: 0~110°C
• Input Power: DC 12V
• Static Current: ?35mA, Attract Current: ?65mA
• Measurement Input: NTC(10K 0.5%) Waterproof Type Sensor
• Output Range: 1 Channel 10A Relay Output
• Environment: -10~60°C, Humidity: 20%-85%
• PCB Board Size: 48 * 40mm / 1.9 * 1.57in
• Package Weight: 26g / 0.93oz